![]() Remark: The procedure described below also seems to work with older uBoots in connection with older kernels and rootfs, which I tested with a GoFlexNet. ![]() I assume that the box in question has the latest uBoot and is able to boot a USB device with the latest kernel and rootfs according to the first two links in section Kirkwood plugs of the wiki. for these), Pogo v4 (see the link in bodhi's edit above as well as the hint in steps 1 and 5 for this box), and Pogo E02, so I am confident it will also work for the other Kirkwood boxes OpenWrt provides images for -) The procedure described in this thread is confirmed to work for Dockstar, GoFlexNet, GoFlexHome, Zyxel NSA325, ZyxelNSA320 (see the hints in steps 1. But, a big "Thank you!" goes to Jörg for his original post. Also, I believe Jörg's post is missing a crucial step in connection with bodhi's uBoot. This thread is a new version of one started by joerg_999 since I did run into a few problems with that one and I wanted to suggest a way which seems slightly easier to me and is also more general, since it is not restricted to Pogo E02. My major changes will be reflected in dark blue. ![]() This goes along with an apology for my dismissing his part A at the time, which now turns out to be essential, especially for the OXNAS, but apparently also for some of the Kirkwood boxes.Īnother point is that I am removing all references to LEDE (which was the project's name for a brief period only, but it was during this period that the thread this tutorial is based on was written - this is how it crept in), since it does not have a place here anymore now (and should not have had when this HowTo was originally written). Thanks go to many people for this, first and foremost, obviously, to bodhi, but also to daviddyer for his post from three years ago. I also made some improvement (in blue) in the installation instruction below.Ĭhessplayer's edit (Aug 14th, 2022): Since there is obviously renewed interest in the subject starting, apparently, in June this year and there is now also a sibling thread for the OXNAS machines, some new insights have been gained (or resurfaced), which is why I am making some corrections and/or additions. Bodhi's edit: this is a very good tutorial! If you're looking to install OpenWrt for the Pogo V4, very important to also see this post. ![]()
0 Comments
Leave a Reply. |